The Truth About Pet Fence Wire Break
However, before digging, we’d advise you to double-check the breakage using the wire locator system. Still, it is better to take help from a professional if you are not sure about finding a break in an invisible fence. Use the instruction manual of the wire locator kit for detailed instructions on which clip goes where and the grounding method. You can check your dog’s collar using the short loop test if the beeping stops during the short loop test.
After repairing the break, carefully backfill the area where you dug with soil and tamp it down to secure the wire in place. It’s important to ensure that the wire is buried at an appropriate depth and protected from potential damage or interference. Start by carefully digging along the path of the wire where the break is located. Be mindful not to damage any other utilities or underground structures in the process. Dig deep enough to expose the wire and give yourself enough space to work with during the repair.
These tools are designed to help identify breaks or interruptions in the wire by sending a signal through it. Start by disconnecting the boundary wire from the transmitter. Then, connect one end of the wire to the tester and hold the other end against the probe. If the tester indicates a break in the wire, it will not emit a signal or display a continuity reading. Move along the wire, repeating this process until you find an area where the continuity is interrupted, indicating a potential break.
As their name suggests, invisible fences are non-physical barriers that operate entirely out of sight. Be sure to leave a small loop of wire at the join to prevent stress on the connection as the ground settles. Replacing just a few inches of damaged wire is usually sufficient.
Buried and submerged wire are always exposed to moisture that makes ground contact. This makes them more susceptible to corrosion than wire that is attached to above ground fences or laid on the surface in consistently dry conditions. Now, connect the two metal legs of the meter with the twisted wires of your fencing system. After this, try to hear the beep since if the meter will beep, it means your wire is not broken, and the error is somewhere else and vice versa. After changing the setting, disconnect the two wires from the transmitter and connect those wires with the leads of the RF choke.
Invisible Fence® Brand boundary wire is a direct burial grade wire and has a life expectancy of 27 years left undisturbed in the ground. The correction from a Computer Collar® receiver may be uncomfortable and startling to your pet, but it will not hurt them. Many pets only feel the correction once or twice and don’t challenge the system afterwards. It is important to note that pet fence wire break we have thousands of different customizable corrections and the correction used is based on the personality of your pet, not the size or breed. We encourage families to wait until their pets are successfully contained for 2-3 weeks before starting the exit ritual. Following this ritual will make learning to leave for a walk a very easy process for both the pet and the family.