The Electronic Dog Fence Installation Mask
In most cases, your pet’s security and safety are the primary motivating factors behind installing the fence. However, there might also be a few areas of your yard that you would like to keep off-limits from your dog, such as a swimming pool, garden or children’s playground area. As you can see, an underground dog fence can be the perfect solution for a myriad of situations. However, as you plan your fence, you might come to the realization that you would prefer not to bury wire or do any digging.
Before starting this do-it-yourself project, first, the pet owner will want to consult a veterinarian. Ask for their recommendations on whether or not an electric fence would be right for your pet. First is the transmitter, which is possibly the most important part of the system. It’s important to see where this component is made and what its rate of failure is.
Wired containment is an effective way to keep your dog safely in your yard, especially if you have a wide area to cover. Here’s how to install an electric dog fence, along with some tips to make the process easier. Whether you are shopping various containment options or looking for a fence provider that’s also an expert in underground dog fence installation in Charlotte, NC, come to Freedom Dog Fence. Your yard will remain beautiful and unmarred, while your dog is protected from any potentially dangerous areas of your landscape or surrounding areas. As an added bonus, you won’t be inconvenienced by the need to walk around above ground fences within or around your yard. Once you’ve installed your underground fence, you’ll probably wish you had done it much sooner.
Terrain – If you have a slope in your yard on a gradient or a hill, the system won’t function effectively as the slope will block the signal from being emitted. To cut the slot into the pavement, you’ll want to use a circular saw and a masonry blade. In most electronic dog fence installation cases, an inexpensive masonry blade will be enough to make small cuts. However, if you need to make more extensive cuts into a driveway or sidewalk, it could be worth your while to use a masonry blade that has diamond tips for extra durability and strength.
While most electric fences for dogs come with gauge 20 wiring, the Extreme Dog Fence provides gauge 14 wires. These wires are bigger and so provide a much safer electrical pathway for the system to work. And this means the Extreme Dog Fence gives you get a very reliable dog fence system. Be sure to find an electric dog fence with a quality collar that has swappable contacts. The contacts are the two points that press against the dog’s skin to provide an electrical correction.
Working with approximately one yard of length at a time, dig your trench. Then, lay the wire in the trench and bury it, using the dirt you removed while digging. If you find it difficult to keep the wire in the trench so that it can be buried, simply use some lawn staples to help hold the wire in place before covering it with soil. Since you’ll probably be able to find a package of lawn staples at your neighborhood garden center or home improvement store for $15 or less, they are an inexpensive way to make the job easier. Step down firmly on the area to compact the soil, then move on to the next yard-long section. When installing the fencing wire, it’s usually easiest to work with shorter lengths of wire as opposed to rolling it all out at one time.
Electronic Dog Fence Installation
For those who still may have some questions about invisible dog fences, this section might help. If any queries remain after reading this section, feel free to contact the manufacturer’s customer service line. By twisting the wire around itself, dog owners can run the wire out to the restricted zone and then loop the area with a single, untwisted wire. The twisted wire will not transmit to the collar, allowing dogs to travel freely. Once the dog enters the single-wire section, the signal will work with the collar again, keeping the dog inside the yard.