Methods To Search For Pet Fence Troubleshooting
This issue is governed by the physics of radio signals and antennas and is not specific to a fence brand. This phenomenon is more typical in lots under 1/2 acre than on larger property because of the concentration of signal being broadcast into the center of the yard. The following situations can cause phantom signals to occur in your yard. We charge to mark your yard before aeration or any other kind of work on your yard. The price depends on the size of the yard (time and materials).
It will flash every time there is a beep, even when you don’t hear it. Alternatively, test the sound by removing the collar and placing it close to your ears when you are next to the fence’s boundary. The pet fence troubleshooting transmitter is the tool through which the fence connects with the animal’s collar. When the connection is right, some vibrations occur in the animal’s neck area, preventing it from crossing the boundary.
Ensure the receiver collar is snug and that the battery is charged. If the collar beeps in a long and continuous cycle, then that usually means that the fence system has broken down somehow. On some models, this is a continuous series of short beeps, often once every second.
Pet Fence Troubleshooting
Your dog should enjoy maximum freedom, healthy foodstuff and proper grooming. Keeping your dog safe from any dangers requires having the best dog fence in your premises. A fertilized yard contains more conductive materials than an unfertilized yard because fertilizers contain salts. Any concentration of salt creates a corrosive environment eventually creating a wire break and a wire break alert.
For the RX-10 make sure the collar has been charged for a full three hours. The audible warning should sound and the CABLE “BREAK” LED should illuminate. This test is designed to identify if the malfunction is occurring in the collar, the transmitter or the wire loop. After replacing the collar battery make sure you test the collar and see if it’s working or not.
The collar receiver failing to beep is a common issue among all invisible fence systems, even with modern wireless systems. This tends to come up, particularly when installing a new collar to the wireless pet containment system. I start by first checking if the LED indicator light is on. This tells me that the power supply is distributing power correctly.