The Nice, The Bad and Hidden Pet Fence Break Locator
At first, the signal might be a beep or vibration as a warning. If they cross the boundary, the signal intensifies and may include an electrical shock as a correction. Owners must train the dog to recognize the warnings and alarms for an invisible fence to work. Buried wire fences are labor-intensive to install, and if the wire breaks, you might have to dig it up to find the problem. I had this issue with an invisible fence, and we ended up digging up our yard several times to find the short. These fences tend to be more affordable, and they rely on electricity rather than technology or satellites, which can be unpredictable.
Still, the risk of your pet leaving the boundary area is heightened when the system is down, so we recommend erring on the side of caution. Even if you buy a wire locator you need to understand the short circuit method to find the break. A wire locator just finds the wire and only works with a complete circuit loop. Let me tell you about my new best friend – the Buried Wire Locator Dog Fence Invisible Fence Wire Break Locator. With this locator, I was able to find and fix the issue all on my own.
Measure the circumference of your dog’s neck to make sure the collar will fit properly. Models with more than one node size are also a good option for larger dogs, especially long hair breeds. A fence that includes multiple correction levels can also make sure the collar gets a larger determined dog’s attention. If you’ve got a pack of pups around, the Extreme Dog Pro Fence System comes in kits for up to five dogs. This model can also extend to include up to 25 acres within the coverage area.
First, you will need to purchase an RF choke at your local electronics supply or hardware store. Next, disconnect your wires from your transmitter and replace them with the choke-one end of the choke in each lead on the control box. There should not be any wire break error when the choke hidden pet fence break locator is in place. Now, take your two end wires and attach one to either side of the choke by wrapping the wire around the choke. Be certain that the choke is touching the uninsulated end of each wire. Use the AM radio to detect the break by walking the perimeter and listening for silence.
Tune the radio to the frequency of the fence’s signal, which is typically around 600 kHz. Walk along the perimeter of the fence while passing the radio antenna over the ground. When you hear a clear signal, you have found the break in the wire.
To find the precise location of the break, move the wire locator over the area. Using a wire locator to repair the break yourself is less expensive than hiring a contractor to complete the work. The price of an invisible fence wire break locator can vary depending on brand, features and quality. However, it’s important to invest in a good quality locator as it will save you time and money in the long run. Consider your budget and choose a locator that offers good value for money without compromising on quality.