How To Restore An Invisible Fence Dealing With Wire Breakspet fence break locator
This is routinely done by invisible fence installers and the process is actually fairly easy for anyone who has worked with wires before. All you’ll need to fix the problem is some underground-rated and waterproof 14 or 16-gauge wire. Once you have the right wire, you can find the spot where the wire has broken and you’ll be able to splice in the new wire in order to repair your wire break. If the wire is broken, it’s actually fairly easy to fix the problem.
You need to start by changing the meter setting, which is quite simple. All you need to do is search for a speaker icon, and your multimeter will be set pet fence break locator on continuity setting. After changing the setting, disconnect the two wires from the transmitter and connect those wires with the leads of the RF choke.
Pushing the Correction Level Button while the Receiver Collar is on level 5 will cause the Receiver Collar to revert to Level 1. Refer to the Function and Response Table to choose the Static Correction level that best fits your pet. The Receiver Collar will emit a Warning Tone and vibrate whenever your pet enters the Warning Zone, no matter what the correction level the Receiver Collar is set to. If your pet continues into the Correction Zone, and the Receiver Collar is set to level 2 or above, he will receive a Static Correcton. Hang the antenna of the receiver on the ground and swing it back and forth.When the break point is reached, the tone will weaken and then disappear. Install two 9-volt batteries, then disconnect the loop from the fence controller.Connect the transmitter to one of the two wires going out to the loop and turn it on.
GentleSteps™ carefully introduces your dog to the new environment using the slightest collar “sensation” to indicate where to stay and where to go. Lauded by owners and dealers nationwide, GentleSteps™ has helped Pet Stop establish itself as one of the most humane companies to use for your pet’s welfare. To help make your dog aware of his new boundaries, the collar’s receiver will cause a minuscule “correction” via radio wave.
Invisible fences, also known as electric dog fences, are effective, humane, and far less obtrusive than traditional wood or wire fences. They tend to be especially popular with dog lovers who own lots of land, as they make going to the trouble and expense of installing acres and acres of old-fashioned fencing unnecessary. First of all, unplug the transmitter from the control box and change its setting from FM to AM. By doing so, your transmitter will begin sending the low-frequency radio signals to the invisible fences, instead of a strong single.
This tester works pretty well and I found the break in my border wire caused by a digging possum. It would get 5 stars except it is pretty pricy and includes wire and connectors which, though convenient, are not necessary. You should have connectors and original wire from when you put in the system originally. BTW, I used it to find a break in the border wire for my Landroid lawn mower, not a dog fence… So, just tug the wire gently, and on finding a loose end, dig the ground to fix the breakage. However, before digging, we’d advise you to double-check the breakage using the wire locator system.
As you move a transmitter above the ground with the appropriate frequency selected, you will detect the signal. Before you choose more time- and energy-consuming methods to detect a break in the wire, I recommend you to be sure that the problem is genuinely in the wire. Finding a break will be much simpler if you label the entire boundary before placing the wire because you will be certain of the exact location of your electrical cables. Finding a hole in an invisible fence may sound like an irritating task, but it’s pretty straightforward.