The Idiot’s Guide To Dog Fence Installation Cost Explained
However, vinyl fencing can be cheaper in the long run due to lower maintenance costs compared to wood. Unlike wood fencing, vinyl doesn’t need resealing every 1 to 2 years. Tall privacy fences cost the most, while basic split rail vinyl fencing is the cheapest option. Some companies can install the posts in concrete and the fencing all in one day. Add an additional day for every 100 linear feet past the initial 150 feet.
The following are average costs for various kinds of invisible fencing (not including materials). The cost of installing a dog fence will vary depending on several factors, such as materials used, the size and location of your yard, and labor costs. On average, you can expect to pay around $1,200 for a standard dog fence installation. This is just an estimate—you may need to budget more or less depending on the specifics of your project. An underground dog fence costs $800 to $2,800 installed on average or $2 to $7 per linear foot. This system includes installing inground wires to create a protective perimeter in the exact shape and location needed.
There are a variety of methods people use to help keep their pets safe outdoors. Leashes, ground stakes, and harnesses are just a few ways that physically restrain the movement of the pets. Homeowners can also invest in a physical fence that can act as a barrier around the yard to keep pets from running into the road or wandering into the neighbor’s yard. No one can see the boundaries you’ve set up, but your dog knows they’re there.
For example, uncoated wire for an average height fence with standard gauge and thickness costs approximately $8 per foot. The price of vinyl coated wire of the same gauge and thickness usually runs about $15 per linear foot. For instance, five foot and six foot high fences are typically $1-2.00 more per linear foot than four foot high fences. In most cases, fences featuring thick wire and a low gauge are costlier than fences with an average gauge and thinner wire.
The average cost will likely be less since the entire front is often not fenced, or if it is, the fence is shorter or made of different materials. To arrive at the average costs in this article, we surveyed five local and national cost databases. All averaged figures were correct at the time of publication and may be subject to change. Once you decide on your mesh finish, look up its cost in your area. Then multiply the fence’s length and height to find the total fencing area. Finally, multiply that number by the cost of your chosen mesh per linear foot.
A good fence will also keep out any neighborhood critters that might bother your pup, like stray cats or wild animals. Plus, they can keep other dogs out of your yard if you’re not a fan of unexpected visitors. The invincible fence is meant to prevent dogs from wandering off from the yard, but technically, it doesn’t protect them from external hazards. Intruders can easily go past the fence and interact aggressively with your dogs.
Determine how much area you’ll want to cover before you purchase a system. Most basic systems include a transmitter with the potential to enclose an area of about 25 acres. Higher-powered transmitters are also available to enclose larger areas. Additional wire is necessary for such big jobs; a system will typically come with 500 feet of wire, enough to enclose roughly dog fence installation cost 1/3 of an acre. To figure out the price your own project would be closest to, you can take the average rate of $2.25 per linear foot and multiply it by the size of the boundary you need in linear feet. A wireless electric fence system may have a limited reach, but you can always extend the boundary of a wired system simply by purchasing and installing extra wire.