7 Ways to Guard Against Invisible Fence Wire Break
You must carefully pull out all of the underground wire in your yard to inspect for any breakage. If you wish to keep repairing the existing broken wires, repeat the steps above to repair multiple sections of the wire. Inspect for all wire breaks to properly repair your electric dog fence. Once you find the place where the wire has broken, you’ll need to splice in invisible fence wire break the right kind of wire to repair the break. It’s generally recommended that you use a 16-gauge wire for this task, specifically one that’s rated to be buried underground and that’s waterproof. You may actually be able to pick up a patch kit from your invisible fence dealer, but even if you can’t you can purchase the wire on your own and create your own splice.
If the Power Cap battery is fresh and has power, check to see if your pet’s Computer Collar receiver is fitted properly to their neck. The collar should be snug enough to slide only one finger between a correction post and your pet’s skin. Remember to adjust the fit of the collar as your pet’s coat, weight, and age change. Your pet’s coat may change from season to season so be sure to check their collar at least seasonally.
If you cannot figure out how to do it on your own, you should call a service to do it for you. There are plenty of local service providers that will be happy to assist you in this manner. However, don’t delay it too much since the beeping may indicate problems with the fence that may result in your dog running away.
invisible fence wire break
If you prefer using wire nuts instead of tape, insert the twisted joint into the wire nut and twist until it’s tight enough. DON’T reattach the two broken pieces of wire; any tension on the wire will pull the attachment. This locator can detect wires up to 80 cm away from the sensing unit.