Things You Can And Can’t Use Your Electronic Dog Fence Installation For
Most systems will include a transmitter and about 500 feet of wiring. In theory, the average transmitter can cover a space of about 20 to 30 acres of land. However, 500 feet of wire will cover only about one-third of an acre. That said, you can always purchase more wire if you need to enclose a really large area with your fencing system.
The next step is to introduce a small correction stimulus, similar to the feeling of a small static shock. Those with back problems may want to enlist the help of friends or simply hire a professional. Typically, one large loop is run around the area, and an area of twisted wire connects back to the control box and allows the dog to pass over electronic dog fence installation it without receiving a correction. Also, be sure not to run wires along other telephone, electrical, or antenna wires. As with an electrical work, be sure to take the proper safety precautions. Underground electric fences, also known as invisible fences, use buried underwire to create a boundary that pets or livestock are trained to recognize.
The more complex your fence design, the more expensive it will be to install. Choose a design with fewer features, corners and gates to reduce the cost. The total length of the fence is one of the most significant factors that affect the cost. Longer fences will require more materials and labor, so they tend to cost more. Dr Louise Cosgrove is a dog owner and veterinarian by profession.
Yes, an electric dog fence does have to make a complete loop in order to work effectively. It creates a boundary for your dog and ensures that they stay within a designated area. I bury the electric dog fence wire 3 to 12 inches deep in the ground. The shock delivered from the sensor collar, usually between 1,500-4,500 volts, is considered mild by providers. There is a risk for injury if the voltage is too high, so we suggest you follow the directions found in the device’s manual carefully. Just to be sure, many pet parents first test the system on themselves before putting the collar on their pets.
This means your dog fence wire must start and stop at the same place. When testing if the collar works, hold it at least centimeters above the wire (at the dog’s height), and NOT human height. Make sure to keep the collar’s contact points facing up towards the sky with the test light attached over the metal points. While holding the collar in your hand, walk up and down toward the boundary wire. As you approach the boundary the test bulb should emit a flashing light indicating that the collar is shocking and the system is working correctly.