The Great, The Bad and Invisible Fence Break Locator
Turn on the dog fence transmitter and run the tests in the next step to check the collar and dog fence transmitter for issues. If those both work then there’s a boundary wire break in the underground wire. The most common and popularly effective method of finding breaks in both under ground and above ground electric fence systems is through a radio broadcast. As you walk the perimeter of your fence line, this radio will give off a humming or light static noise as you go along the length of the line.
In addition, a slight shock is sent to their collar every time they breach this boundary, prompting them to immediately walk in the opposite direction. If all tests passed, there might be a break in the boundary wire. You’ll need to carefully dig up the invisible fence wires to locate the wire break.
Dogs have a habit of jumping over or digging under chain link dog fences or other solid barrier dog fences. The new dog containment fence systems have shown themselves to be not only an effective pet product, but safe and humane as well. E-Collar Technologies, PetSafe, SportDog and Perimeter Technologies Dog Fences have dramatically changed pet containment systems. You do not need to spend thousands of dollars on traditional wood or chain link fencing. These dog fencing systems use technologically advanced collars creating an invisible radio barrier that dogs will not want to cross. These dog fence systems are easy to install and after a few training sessions, your dog will never run away again.
Twist the positive wire around one of the screws on the outside of your house or into an electrical box. To ensure that there are no shorts, make sure that you cut off any stray wires before installing them. Then twist another piece of wire around a screw that is driven into the ground in order to secure it properly so it doesn’t fall out. If you’re done being patient, it’s time to go ahead and turn the engine on. Hold up the AM radio and walk around your yard so you can feel for any trace of a signal.
invisible fence break locator
The invisible fence logo, fencing pet safe radio safe dog power cap gate power shields pro lite r21 r51 a12 and computer collar are registered of systems corporation. Using a wire break locator can significantly simplify the process of locating breaks in the electric dog fence wire. It provides a more precise and targeted approach, allowing you to address the specific area where the break has occurred. A growing number of dog parents are trusting electric pet containment systems over traditional fences to protect their beloved four-legged friend. As great as electric dog fences are, it isn’t uncommon for a wire break to occur over their lifetime. Turn off your invisible fence system & carefully dig up the soil to find the underground dog fence wire.
While walking the perimeter of your fence, wave the device over the general area of the ground wires as you do so. If you’re using a wire locator, it will stop beeping when it passes over a break. The static should disappear for a short period if you’re using a homemade invisible fence break locator detector. Once you’ve identified the spot responsible for allowing your pet to escape, it’s time for repairs. The good news is fixing invisible fences is usually not too complex. But it does require getting your hands dirty to bury the wire back underground properly.