Hidden Responses To Invisible Fence For Dog Break Locator Unmasked
You should have no trouble figuring it out, seeing as how you already possess enough tech savvy to go with an invisible fence in the first place. For this sort of project, it’s best to start simple and see if you can spot the break with your own two eyes before moving on to more involved detection methods. Ready to track down that pesky break and get your fence back in working order? Before we get down to the nitty-gritty of troubleshooting an invisible fence on the fritz, it will be helpful to have an idea of how these products function.
This causes a wire to thin and break or change to a less conductive state, creating a wire break or wire break alert. Another way a nicked line can affect us is that sometimes after a wire pulls apart and breaks, it can also move back together as the ground shrinks and expands, over and over. Wire is a metal conductor – Usually it is between 14 to 18 AWG Copper or Copper Clad Steel (either is typically used in the dog fence industry). The wire is highly conductive and subject to rapid corrosion when open to a wet or corrosive environment. Buried and submerged wire are always exposed to moisture that makes ground contact. This makes them more susceptible to corrosion than wire that is attached to above ground fences or laid on the surface in consistently dry conditions.
These devices are specifically designed to help trace the path of a wire, even if it’s buried underground. Connect the wire tracer to the boundary wire and slowly move it along the fence line. The device will emit a tone or signal that becomes stronger as it gets closer to a break or interruption in the wire.
Invisible Fence For Dog Break Locator
Invisible fence systems have transformed the way pet owners define boundaries for their furry friends. However, like any outdoor setup, invisible fences are susceptible to damage from various factors, including weather, landscaping, and accidental cuts. But even the best invisible dog fence is not immune to damage and faults.
Be careful not to strip too much insulation, as this can weaken the wire. I hope this comprehensive guide has covered all the potential questions you had about finding and fixing an invisible fence line break! Re-introducing the static correction at higher levels may be needed to reinforce training. Look for signs your dog understands versus is willfully disobeying too. However, Invisible Fence® products are intended for domestic dogs and cats, and we have only developed training protocols for these pets.
Before you or your contractors begin this type of work, draw a map of your hidden fence boundary and highlight potential problem areas. Or better yet, temporarily mark where the boundary wire is buried using DogWatch flags or other similar small flags. Then, take your extra wire and test whether the transmitter is working correctly. invisible fence for dog break locator A short length of test wire will do for this, and some invisible fence kits even come with a short wire meant exactly for this. However, it’s a little quicker if you just use the whole length of your extra wire to test the transmitter. When you’ve located the area where you suspect the break to be you’ll need to expose the wire.