Seven Questions and Answers to Dog Fence Installation
You just have to be sure to separate the parallel wires by at least 4 feet. If you don’t, you won’t get a nice strong signal along the boundary. In addition to this, you may have dead spots where there is no correction at all. In this situation, you can simply begin by running your dog fence wire along the bottom of the fence, and then come back to the transmitter by running the wire along the top of the fence. In-ground systems offer more customization and you can place the wire above or below the ground or mount it to an existing fence as long as the fence isn’t made of solid metal sheeting. These fences can cover larger areas (up to 10 acres of coverage) effectively while maintaining the aesthetics of your property.
Many times the problem will involve a loosened area of spliced wire. So, first checking any areas where you have spliced the fencing wire can be a good place to start. Once you’ve found and corrected any problems, the indicator light on the transmission box will confirm that the fence is now working properly.
Again, be sure to check indoors by using the receiver collar to make sure the signal cannot be detected. If you find areas indoors where the receiver collar picks up the signal, use the control box to reduce the boundary width of the fence, or simply reposition the wire. If this is the case, your dog could receive erroneous correction signals while he or she is indoors. You can test this by simply walking around the inside walls of your home while holding the receiver collar, making sure that no signals are detected. If you do find that signals can be detected indoors, simply move the wire a little further from the exterior walls or adjust the fence’s boundary width.
Once you’re finished burying the wire, leave the flags in place until you’ve fully trained your dog to know where the boundary is. The Ultimate Guide to Keeping Animals Happy & Healthy.PawTracks brings inspiration, tips, the best products on earth to ensure our readers and their pets are happy and healthy. 💡 The dial (1-10) on the transmitter box is the range or distance between the collar and the wire. The numbers dog fence installation indicate the distance at which the collar starts to emit a warning tone, vibration and shock from the wire. The transmitter box should NOT be near any major electrical appliances, like antennae cables, refrigerators, air conditioning units, etc. As a rule of thumb, the transmitter box should be at least 3 meters away from any major electrical appliances because these appliances can interfere with the signal emitted.
Otherwise, it’s a good solution if you’re willing to install the wires that form the system’s boundaries and invest the time necessary to train your dog. Consult your veterinarian if you have any questions about the suitability of one of these systems for your pet. Properly training your dog to understand and respect the boundaries set by a wireless fence is as crucial as choosing the right system.
Aluminum fences are lightweight and rust-resistant, making them an ideal choice for areas with high wind or salt air. They require very little maintenance beyond occasional cleaning with soap and water. Our competitors offer some sort of warranty to cover manufacturing defects, but only Pet Stop® offers UltraCare!