Before You’re Put Aside what You Should Do To Find Out About Pet Fence Break Locator
Even though you’ve already decided to use an invisible fence, you should have no problem figuring out how it works and how to find a break in an underground dog fence. But it doesn’t matter if you have an old-fashioned or an invisible fence around your property; you will eventually have to deal with a breach. Breathe easy knowing your pet is safe inside a wireless dog fence. These fences employ either a static or a tone correction, or a combination of both, to help train your dog to remain away from off-limits areas. When you’ve narrowed it down to perhaps a quarter segment of the boundary wire, unearth the erring segment so you can move on to examining uncovered ground wires for visible physical damage.
The beeping will stop using a wire locator when it crosses the break. In addition, it’s possible to detect radio waves by using a homemade radio detector, which will cut out some of the static. When an underground dog fence wire is broken, it will cause you (the dog owner) to deal with many problems.
Once done, connect the whole wires that are now joined to an rf choke too, with the transmitter. Plug the transmitter into the power board and turn the system on. Start with analyzing the transmitter, and you’d find two wires coming into the transmitter through two checkpoints. Disconnect both wires, which will shut the transmitter beeping up. However, the wire needs to stay 3-24 inches beneath the ground surface – If too high, someone may tip over it, and if too down, the intensity of signals will be compromised.
You may find after some time that your pet is very tolerant of the collar. It is important to continue daily checks of the contact area. If redness or sores are found, discontinue use until the skin has fully healed. This PetSafe® Stubborn Dog In-Ground Fence™ is not a solid barrier. This system is designed to act as a deterrent to remind pets by Static Correction to remain in the boundary established. It is important that you reinforce training with your pet on a regular basis.
Using this method, one may figure out whether the damage is in the wire or any other part of the system. The best point to start with is visual inspection; finding the break in the wire with your eyes before moving to complicated methods. However, the good news is the broken wire can be fixed if it’s of good quality. But, before fixation, you need to locate the break in the wire, which is, undoubtedly, a very daunting task but not impossible.
To use a wire break locator kit, you will have to unplug your dog fence transmitter and connect the locator to the twisted wire. You will then have to ground the sending unit by connecting the enclosed wire to an electrical outlet’s center screw. Then plug in the sending unit to turn on both lights on the transmitter. Lastly, turn pet fence break locator on the AM radio and adjust the dial to a channel without a radio station. A growing number of dog parents are trusting electric pet containment systems over traditional fences to protect their beloved four-legged friend. As great as electric dog fences are, it isn’t uncommon for a wire break to occur over their lifetime.
Instead of spending a weekend rerunning the fence wire, we spend about 1 -2 hours using the Break Locators. We realized that we could also use the detector to help us mark the fence location if we every need to dig near our property line. Get an Am Radio to Locate the BreakNow it’s time to pull your old AM radio out and set it to the lowest AM setting so it can detect the radio signals coming from the transmitter.