Invisible fence, dog fence, underground fence, electric fence

Life After Dog Fence Break Locator

Tips On How To Find A Break In An Invisible Canine Fencedog fence break locator

This process is relatively easy if you have set up the boundary wire on your ground surface rather than a buried underground wire. A traditional invisible fence involves burying a series of electrical wires underground across the whole perimeter of your choosing. This buried wire is connected to a mounted radio transmitter with a power source. GPS invisible dog fence break locator fences are particularly beneficial for very large properties or for people who travel a lot with their pets as they can create a containment area wherever they go. However, they require a good GPS signal to work properly, and they don’t allow for boundary customizations around specific areas like gardens or pools within the larger boundary.

dog fence break locator

Once you have found the broken wire, use wire strippers to remove about an inch of insulation from either side of it. If there is no indication from the first wire, continue testing each wire individually until you find the one with a break. Begin by turning off the power to the fence and disconnecting any wires that lead to it. Obstructions can block the transmission of the signal, causing your dog to be able to wander out of bounds. Common obstructions include trees, large metal objects, and even buildings. Finally, we can do a visual inspection of the perimeter to ensure that the system is working as intended.

If you prefer using wire nuts instead of tape, insert the twisted joint into the wire nut and twist until it’s tight enough. That’s the only way for the handheld device to be able to detect any electrical activity. Additionally, consulting the fence system’s manual for guidance and reaching out to the installation company for assistance are viable options. If these methods prove ineffective, you may resort to careful digging in the suspected fence location as a last measure. When a metal object comes into contact with the magnetic field generated by the metal detector, the metal object itself reflects a magnetic field causing a disturbance. Rather than splicing, it may be best in some cases to simply replace damaged sections of wire altogether.

Dog Fence Break Locator

If the break is a result of a loose connection or a minor interruption, you may be able to simply reconnect the wire firmly. Ensure that the wire ends make a solid, secure connection and use wire nuts or electrical tape to insulate the connection point. Before starting the repair process, make sure you have the necessary tools and materials on hand. You will need a shovel or a trenching tool to dig along the path of the wire and a pair of wire strippers to remove the damaged section of wire. Lastly, don’t forget to inspect the transmitter unit and check for any error messages or alarming indicators. The transmitter can provide valuable information if there are any issues with the overall system.

Combines with an app to set virtual fences or see their movements too. This is an ideal depth for adequate signal transmission and protection from lawnmower or other lawn activity damage. If you are considering replacing your fencing system, check out our article on the best invisible fence to guide you with your purchase. Use the instruction manual of the wire locator kit for detailed instructions on which clip goes where and the grounding method. As the name already suggests, all invisible fences operate out of sight. Although physical components are involved, the fence is INVISIBLE to our eyes.

Scroll to Top