Invisible fence, dog fence, underground fence, electric fence

Invisible Fence Wire Break Help!

What The Authorities Are not Saying About Invisible Fence Wire Break And How It Affects You

Using a drill and driver, screw the transmitter to a wall that’s well-protected from the elements and close to an electrical receptacle. Inside the garage is ideal, but invisible fence wire break the basement or a weatherproof outbuilding also works — anyplace where it won’t get wet. Nothing works better than a physical fence to prevent your dog from wandering.

invisible fence wire break

If you want to save money on installation, opting for a wireless setup will cost about $875 less than an in-ground system and is easier to DIY. There are many pros and cons to consider before you schedule an installation and pet training session. The size of the invisible fence can impact the cost, as you’ll pay more to cover larger properties. The cost of an invisible fence ranges from about $3 to $9 per linear foot. Invisible fence costs for a half-acre yard average between $1,000 and $1,500, whereas a full acre can run between $1,500 and $2,100 on average.

invisible fence wire break

This means that if a homeowner has three dogs, they will need to pay for at least three collars, adding about $300 to $600 to the total. Training costs may also increase based on the number of pets. The green blinking light is reassurance that the fence is working. If the underground invisible dog fence has some wire break, the green blinking light will go out, and you will also hear a warning sound from the fence. This is because the signal to the light is affected by the digital range of the transmitter’s control panel that creates signal fields on every side of the wires. Begin by setting the multi-meter to the continuity setting, which is the position that resembles a speaker.

You can use a new wire and thread it through PVC pipes to keep it safe. Since most wires are either on the surface or buried less than three inches, they can be cut easily. Remember to note where your wire is for yourself and any work you need to be done around your home. If your pet containment system came with a thin wire, you may want to replace it with a thicker wire. A seven-strand wire with a sturdy coating will last longer and help resist breaks.

The boundary wire is a crucial component of the system, as it creates the invisible boundary that your pet is trained to respect. If there is a break or damage in the wire, the system will emit a warning beep to alert you of the issue. The cost of installing an invisible fence yourself will run you around $300 to $450 on average (kits are for one pet). If you have multiple pets you plan to put on the invisible fence system, you’re going to need to ensure the system supports it. For those renting or with half an acre or less, you might want to consider a wireless invisible fence.

Scroll to Top