Function As First To Learn What The Experts Are Saying About Pet Fence Troubleshooting
In almost every instance it costs less to mark than to fix a fence. The minimum charge to fix a fence from aeration (1 cut, 30 minutes of time) is at least $135. The problem is, sometimes an aeration job will not cut it thru, but damage it in multiple places. These places will eventually fail in a cascading fashion over time. This type of failure ends up requiring multiple repair trips. If the wires are pulled loose from the lightning protector, the wall-mounted Transmitter will beep incessantly and your fence is not working.
You’ll need to use a specialized tool to find the wire break in your boundary wire and check the splices. We cover the tools you can use or the DIY setup you can build with a radio in this article on finding breaks in your underground fence wire. The dog may not react to static correction because the correction level settings may have been tampered with.
Pet Fence Troubleshooting
For all tests use the same correction level on the receiver collar. To check if the transmitter is having issues you’ll need to disconnect the existing boundary wire and connect a short 15-foot section of boundary wire to run some tests. Check the transmitter and ensure that the wires connected to the transmitter jacks are working. If there is a drop in the signal, this is a clear indication that you have to change the wire system. An RF choke can be attached to the transmitter jacks and solve the problem.
Also, a damaged wire laid on top of a garden may also not corrode as quickly as one under the mulch or in the dirt. Moisture causes expansion and contraction of the soil – Think of a sponge on the counter behind your sink that is sometimes dry and shrunken while other times it is wet and plump. Imagine a wire in that sponge that under proper conditions will expand to the size of the sponge. However, damage to the wire, and it is subject to breaking under the pressure of expansion. Nicks in the line don’t present immediate problems to the system.
To begin troubleshooting, start by checking the collar’s functionality and battery life. A dead battery could cause the collar to malfunction, so make sure to replace it if necessary. Additionally, assess the collar’s condition for any signs of wear or damage that may affect its performance.
For better understanding listen to the warning beeps that will help you out. They send low-voltage shocks that create an unpleasant but painless sensation for dogs. This kind of corrective method has been considered a safe practice for decades. Like most dog fence collars, there are a few potential pet fence troubleshooting downsides to be aware of when considering the JUSTPET Wireless Dog Fence Containment System. This means your dog can have fun in rainy and humid environments while being safely contained. The collar receiver also has a built-in battery, which makes it durable and suited for long-term use.
Ensure that the contacts on the collar are clean and properly aligned with your pet’s neck. If you notice any damage, consider replacing the collar or contacting the manufacturer for further assistance. Interference sources can disrupt the signal between the invisible fence and the collar, causing the red blinking light. Common interference sources include Wi-Fi routers, cordless phones, and other electronic devices.